Civil Engineering Drawing Practice Test 7

1. The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 km ph, is ____________

2. ______________ are workshop-based and specialize in working the stones into the shapes required by a building's design, this set out on templets and a bed mould.

3. The reinforcement in an RC structure, such as a steel bar, has to undergo the same strain or deformation as the surrounding concrete in order to prevent discontinuity, slip or separation of the two materials under load.

4. For ideal work, plastering should be applied in three coats- the rendering or first coat of 10 mm, the _____________________ and finishing coat of 5 to 6 mm having a total minimum thickness of 20 mm.

5. Which authority is responsible for national highway?

6. Enoscope is used to determine ___________

7. English garden wall bond course of headers bond has three courses of stretchers between every course of stretcher.

8. The distance travelled by revolving the wheel of a vehicle more than its circumferential movement, is known as __________

9. In ideal pavement is constructed with _________

10. If the soil is not good and does not permit vertical sides, the sides should be sloped back or protected with timber shoring. Excavated earth shall not be placed within 12m of the edge of trench.