Civil Engineering Drawing Mock Test 7

1. For ideal work, plastering should be applied in three coats- the rendering or first coat of 10 mm, the _____________________ and finishing coat of 5 to 6 mm having a total minimum thickness of 20 mm.

2. General specification gives the nature and the class of the work and the materials in general terms.

3. The basic tools for shaping the stone are a mallet _________ and a metal straight edge.

4. All bricks in this bond are headers, but for the lap-generating quoin three-quarter bat which offsets each successive course by half a header, this bond is called __________

5. What will be the minimum visibility at vertical curves on National Highway?

6. The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 km ph, is ____________

7. A mixture of bentonite and water used to make slurry walls.

8. What will be the maximum superrelevation in hills on Major District roads?

9. Reinforced concrete (RC) is a composite material in which concrete's relatively low tensile strength and ductility are counteracted by the inclusion of reinforcement having higher tensile strength or ductility.

10. Subgrade shall be well consolidated and compacted each with a camber of 1 in 60.