My Report (&Account)

Civil Engineering Drawing Online Test


Correct Answer: 2 points | Wrong: -1 point
Grades: A* (100% score) | A (80%-99%) | B (60%-80%) | C (40%-60%) | D (0%-40%)
advertisement

Here is the complete list of test quizzes on Civil Engineering Drawing.

1. Turbidity of raw water is a measure of ___________

Question 1 of 50

2. Stone grits used for 1st coat and 2nd surface painting may be precoated in advance with advance with bitumen.

Question 2 of 50

3. The expected out turn of 2.5 cm cement concrete floor per manson per day?

Question 3 of 50

4. As a modern technique use of plastics in canal lining is that plastic is covered at the top of the canal to prevent dust.

Question 4 of 50

5. _______________ estimate is a detailed estimate and is prepared to maintain the structure or work in proper order and safe condition.

Question 5 of 50

6. A line may not be __________

Question 6 of 50

7. The four-sided slopes are not the characteristic feature of only Mansard roofs; the _______________ also come with this feature.

Question 7 of 50

8. The minimum width of staircase should be 0.9 m clear of railing and may range up to 1.5 m.

Question 8 of 50

9. Abstract estimate is not the third and final stage in a detailed estimate.

Question 9 of 50

10. Iron products make 10-15% of the total world metal production.

Question 10 of 50

11. For eccentricity in ellipse (e) which relation is correct?

Question 11 of 50

12. The top view obtained by the development of a square pyramid from its plan and front elevation which stands vertically on its base on H.P with one edge of the base parallel to V.P. will be?

Question 12 of 50

13. In Schedule contract the contractor undertakes the execution or construction of specific work with all its contingencies, to complete it in all respect within a specified time for a fixed amount.

Question 13 of 50

14. When drawings are drawn smaller than the actual size of the objects the scale used is said to be _________

Question 14 of 50

15. The design life of flexible pavement is _________

Question 15 of 50

16. The four-sided slopes are not the characteristic feature of only Mansard roofs the _______________ also come with this feature.

Question 16 of 50

17. The inspection pit or chamber is a manhole provided in a base drainage system for ________

Question 17 of 50

18. Name the system, where water falls drop by drop just at the position of roots and water is delivered at or near the root zone of plants, drop by drop.

Question 18 of 50

19. A rectangular lamina of sides 20 mm X 25mm has an edge in HP and adjoining edge in VP, is tilted such that the front view appears as a rectangle of 20 mm X 15 mm. The edge which is in VP is 30 mm from the right profile plane. Find its inclinations with the corresponding principal planes.

Question 19 of 50

20. Unit of payment in MKS of supply paint ready mix is _________

Question 20 of 50

21. The size of the faeces drop hole in the floor or slab should not be larger than ____________

Question 21 of 50

22. Chowkhat shall be 7.5 cm* 7.5 cm of country wood fixed with wooden pegs holds fasts.

Question 22 of 50

23. Laying of pipes shall proceed up grade of slopes. The error of grade shall not be rectified by packing up earth underneath the pipes.

Question 23 of 50

24. Unit of payment in MKS for supply of timber is ________

Question 24 of 50

25. The following figure is a rubbed, keyed or grooved type of pointing.
The figure is a rubbed, keyed or grooved type of pointing

Question 25 of 50

26. The craft of _______________ involves creating buildings, structures, and sculpture using stone from the earth.

Question 26 of 50

27. During lime concreting in foundation if kankar lime is used 0.35 cu m of kanakar lime shall be used with 20 cu m ballast and no surkhi or sand or cinder shall be added.

Question 27 of 50

28. Planes which are inclined to both the reference planes are called __________

Question 28 of 50

29. What is the actual size of standard modular brick-tile?

Question 29 of 50

30. Once a project is planned in terms of ‘events’ and ‘activities’ what next is important?

Question 30 of 50

31. If the front view of a line is parallel to the xy line, its perpendicular length can be ___________

Question 31 of 50

32. ___________ include privacy walls, boundary-marking walls on property, and town walls. These intergrade into fence.

Question 32 of 50

33. Cross-section of earthwork of road in banking is in the form of trapezium. Name the method to calculate the quantity of earthwork.

Question 33 of 50

34. In a case when a line is perpendicular to HP & parallel to VP then what figure will be projected on HP?

Question 34 of 50

35. The figure (4-sided) below represents the intersection of _________
Find the representation of the 4 sided figure

Question 35 of 50

36. Which maintenance service is carried out to maintain the aesthetics of buildings and services?

Question 36 of 50

37. In P.W.D who is the primary disbursing officer who is supplied with cheque books on district treasuries of India.

Question 37 of 50

38. As per I.S. 456 - 1978, the pH value of water shall be?

Question 38 of 50

39. With a very small structure a single column with an umbrella structure above may be acceptable.

Question 39 of 50

40. Calculate the quantity of earthwork for 200 m length for a portion of road in an uniform ground the heights of banks at the two ends being 1.00 m and 1.60 m. The formation width is 10 mm and side slope 2:1. Assume that there is no traverse slope.

Question 40 of 50

41. The number of trips (N) in a 8-hour working day is calculated by the formula __________

Question 41 of 50

42. The isometric view of the figure will resemble what type of structure?
Find the type of structure in the isometric view of the figure

Question 42 of 50

43. Concrete is strong in tension but weak in compression.

Question 43 of 50

44. For ideal work, plastering should be applied in three coats- the rendering or first coat of 10 mm, the _____________________ and finishing coat of 5 to 6 mm having a total minimum thickness of 20 mm.

Question 44 of 50

45. Sleepers (ties) are mostly made up of _______________

Question 45 of 50

46. If subgrade is soft or weak, a thick sub-base of cheap and inferior materials well compacted should be used.

Question 46 of 50

47. You can achieve good passive solar performance at minimal cost if you have a right ____________

Question 47 of 50

48. An impermeable layer is provided at the bed and sides of canal to improve the life and discharge capacity of canal known as ______________

Question 48 of 50

49. Below symbols refer to ____________
Symbols refer to mandatory sign used to set obligations of traffic used in area of road

Question 49 of 50

50. The damp proof course (D.P.C.) is measured in Sq m.

Question 50 of 50


 

Topic wise Test Quizzes on Civil Engineering Drawing

Civil Engineering Drawing tests, quizzes, and exams are great ways to learn and test your Civil Engineering Drawing skills. Whether you’re a beginner or experienced, challenge and boost your confidence with our engaging online quizzes on Civil Engineering Drawing Basics, Orthographic Projection, Surface Development, Projection, Roof Types, RCC Structure, Road Specification, Building Planning, Village House Planning, Construction Work, Reports and Design. Start the Civil Engineering Drawing online test now!



Civil Engineering Drawing Certification Test

Civil Engineering Drawing Certification Test is a free certification exam. However, you need to score an A grade in each of the "Certification Level Tests 1 to 10" to be eligible to take part in this certification test. So, take all the "10 Tests" starting from Certification Level 1 upto Level 10, before taking the final Certification test.


Level 1 to 10 Tests:
Total Questions: 25, Total Time: 30 min, Correct Answer: 2 points, Wrong Answer: -1 point

Certification Test:
Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Civil Engineering Drawing Internship Test

If you scored either Grade A* or Grade A in our Civil Engineering Drawing Internship Test, then you can apply for Internship at Sanfoundry in Civil Engineering Drawing.


Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Civil Engineering Drawing Job Test

It is designed to test and improve your skills for a successful career, as well as to apply for jobs.


Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Note: Before you get started on these series of online tests, you should practice our collection of 1000 MCQs on Civil Engineering Drawing .

Sanfoundry Scoring & Grading System

Sanfoundry tests and quizzes are designed to provide a real-time online exam experience. Here is what you need to know about them.

  • Scoring System: You get 2 points for each correct answer but lose 1 point for every wrong answer.
  • Grading System: Your grade depends on your final score and can be one of the following:

    • Grade A* - Genius (100%)
    • Grade A - Excellent (80% to 99%)
    • Grade B - Good (60% to 80%)
    • Grade C - Average (40% to 60%)
    • Grade D - Poor (0% to 40%)
advertisement
advertisement
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & discussions at Telegram SanfoundryClasses.