Civil Engineering Drawing Mock Test 6

10%

Question 1 of 10

1. The number of trips (N) in a 8-hour working day is calculated by the formula __________

N=8/(2L/S+5/8)

N=8/(2L/S+8/4)

N=8/(2L/S+3/4)

N=8/(2L/S+3/9)

Question 1 of 10

Question 2 of 10

2. A large work or project may consists of several building or small works and each of these work is known as ___________

sub-construction

sub-project

sub-head

sub-work

Question 2 of 10

Question 3 of 10

3. The below figure shows ___________

beaded pointing

weathered pointing

struck pointing

v-pointing

Question 3 of 10

Question 4 of 10

4. The mirror shall be mounted on Asbestos sheets or 60mm plywood with brass counter sunk screws with washers and detachable G.P. caps.

True

False

Question 4 of 10

Question 5 of 10

5. ________________ is an engineering discipline branching from civil engineering that involves the planning, design, construction, operation, and maintenance of roads, bridges, and tunnels.

CS engineering

Highway engineering

Electrical engineering

Structural engineering

Question 5 of 10

Question 6 of 10

6. To make lime plaster, limestone (calcium carbonate) is heated above approximately 50 °C to produce quicklime.

True

False

Question 6 of 10

Question 7 of 10

7. A brick laid on the long narrow side with the short end of the brick exposed is ___________

rowlock

header

soldier

sailor

Question 7 of 10

Question 8 of 10

8. Horizontal boards at the top, bottom, and optionally in the middle of a door that join the two stiles and split the door into two or more rows of panels is known as ______________

mullions

stiles

rails

panels

Question 8 of 10

Question 9 of 10

9. Which type of machine does the figure below represents?

Purifier

Water tank

Electric Cement Mixer

Harvesting machine

Question 9 of 10

Question 10 of 10

10. Flexible pavements are generally used in constructing airports and major highways, such as those in the interstate highway system.

False

True

Question 10 of 10