My Report (&Account)

Statistical Quality Control Online Test


Correct Answer: 2 points | Wrong: -1 point
Grades: A* (100% score) | A (80%-99%) | B (60%-80%) | C (40%-60%) | D (0%-40%)

Here is the complete list of test quizzes on Statistical Quality Control.

1. Which of these can be used to calculate the estimate of mean of the process in the case of the tabular cusums when Ci+ > H?

Question 1 of 50

2. If the quality characteristic in consideration is a strength parameter of the existing process, what will be the minimum value of Cp for two sided specifications for this?

Question 2 of 50

3. Variable control charts can also be applied on attributes but their efficiency will be less as compared to the attribute control charts.

Question 3 of 50

4. The ratio of the number of nonconforming items in a population to total number of items in that population, is called _________

Question 4 of 50

5. The tabular Cusums are made to monitor the ____________ of the process.

Question 5 of 50

6. The model given by Mortell and Runger represents two types of variability, σa2 accounting for the variance over time ___________ and σ2 accounting for the variation between the streams at specific time t.

Question 6 of 50

7. ISO was founded in the year of ______

Question 7 of 50

8. Quantities that can be numerically measured, can be plotted on a _________ control chart.

Question 8 of 50

9. The sample fraction nonconforming is expressed as __________

Question 9 of 50

10. 2-sigma limits are recommended for the modified control charts. Which of these is not one of the reasons for this?

Question 10 of 50

11. For even number of observations of a data distribution, what is the median?

Question 11 of 50

12. The control chart for total number of events is called ____________

Question 12 of 50

13. The event of a specification not satisfied at one point of a product, is called ____________

Question 13 of 50

14. A designed experiment is a test or series of tests in which ____________ changes are made to the input variables so that we may observe and identify corresponding changes in the output response.

Question 14 of 50

15. Sample size is allowed to vary for the construction of the DNOM based control charts.

Question 15 of 50

16. The horizontal line in the control chart which shows the minimum value of a quality characteristic, before the process gets out-of-control, is called the _____

Question 16 of 50

17. If the Mi is the actual sample measurement, and TA is a nominal value, what will be the DNOM?

Question 17 of 50

18. Which of these is a continuous distribution?

Question 18 of 50

19. The six-sigma approach when implemented for a long time, the process may need modified control charts.

Question 19 of 50

20. If the variance of product variability is increased while keeping the total observed measurement variance constant, what will be effect on the gauge capability ratio ρP?

Question 20 of 50

21. What is K called in the expressions of the one-sided Cusums?

Question 21 of 50

22. Histogram generally is a __________

Question 22 of 50

23. Control charts are not effective in defect prevention.

Question 23 of 50

24. Which of these is another name of the reference value?

Question 24 of 50

25. If the value of the quantity ”\((μ_0-K)-x_i+C_{i-1}^-\)” becomes negative, what will be the value of the value Ci-?

Question 25 of 50

26. What should be the minimum value of PCR Cp for a six-sigma company?

Question 26 of 50

27. What is the value of center line of g-chart when there is no standard given?

Question 27 of 50

28. In 3-σ quality performance, the probability of producing a conforming product is _______

Question 28 of 50

29. Which of this stands correct for the relation between the ARL for a shewhart control chart and the individual control chart ARL?

Question 29 of 50

30. If the value of the cumulative sum shifts to a lower value what is likely to be the reason for it?

Question 30 of 50

31. If the number of times a particular stream gives the maximum value of average or range for the GCC, increases, the value of one sided in-control ARL for that event will increase.

Question 31 of 50

32. Which one of these tells explicitly about the potential capability of the process?

Question 32 of 50

33. Tollgate reviews are done _______

Question 33 of 50

34. Is there any relationship between specification limits and control limits of x and R charts?

Question 34 of 50

35. What is the other name of random effects model analysis of variance?

Question 35 of 50

36. If an assignable cause is expected in the process, the subgroups taken subsequently should have a maximum difference.

Question 36 of 50

37. What is the value of the Upper control limit for the g-chart?

Question 37 of 50

38. If the Cpk=0.9899, the usage of modified control charts is very necessary.

Question 38 of 50

39. Tightened inspection is instituted when at least ______ out of 5 consecutive lots have been rejected on original submission.

Question 39 of 50

40. Probability distribution relates the value of a variable to ____

Question 40 of 50

41. When is the normal inspection to be instituted instead of tightened inspection?

Question 41 of 50

42. How are the changes in the conditions of the process, known using the Cusum charts?

Question 42 of 50

43. For the calculation of Cpk the quality characteristic should have a lognormal distribution.

Question 43 of 50

44. For a process, sample size=5, process standard deviation=0.15, mean=1.5, and the std. deviation of mean is 0.0671. What will be the value of 3σ upper control limit for the construction of control chart?

Question 44 of 50

45. Which of these measures the actual capability of the process?

Question 45 of 50

46. The LSL in the Cp is called ____________

Question 46 of 50

47. The assumption that links normality to the control charts is ___________

Question 47 of 50

48. Length of a rectangular box is _______

Question 48 of 50

49. What of these can be used as the decision interval for the tabular cusum charts?

Question 49 of 50

50. The variability in the sample data is measured by _____

Question 50 of 50


 

Topic wise Test Quizzes on Statistical Quality Control

Statistical Quality Control tests, quizzes, and exams are great ways to learn and test your Statistical Quality Control skills. Whether you’re a beginner or experienced, challenge and boost your confidence with our engaging online quizzes on Statistical Quality Control Basics, DMAIC Process, SPC Method and Philosophy, Variable Control Chart, Attribute Control Chart, EWMA Control Chart, Short Run SPC, Experimental Design and Acceptance Sampling. Start the Statistical Quality Control online test now!

Statistical Quality Control Basic Quiz

DMAIC Process Quiz

Modeling Process Quality Quiz

SPC Method and Philosophy Quiz

Variable Control Chart Quiz

Attribute Control Chart Quiz

Process Capability Ratio Quiz

Measurement System Capability Quiz

Time Weighted Control Chart Quiz

EWMA Control Chart Quiz

Short Run SPC Quiz

Advanced Control Chart Quiz

Experimental Design Quiz

Acceptance Sampling Quiz


Statistical Quality Control Certification Test

Statistical Quality Control Certification Test is a free certification exam. However, you need to score an A grade in each of the "Certification Level Tests 1 to 10" to be eligible to take part in this certification test. So, take all the "10 Tests" starting from Certification Level 1 upto Level 10, before taking the final Certification test.

Level 1 Test Certification Test

Level 1 to 10 Tests:
Total Questions: 25, Total Time: 30 min, Correct Answer: 2 points, Wrong Answer: -1 point

Certification Test:
Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Statistical Quality Control Internship Test

If you scored either Grade A* or Grade A in our Statistical Quality Control Internship Test, then you can apply for Internship at Sanfoundry in Statistical Quality Control.

Statistical Quality Control Internship Test

Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Statistical Quality Control Job Test

It is designed to test and improve your skills for a successful career, as well as to apply for jobs.

Statistical Quality Control Job Test

Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Note: Before you get started on these series of online tests, you should practice our collection of 1000 MCQs on Statistical Quality Control .

Sanfoundry Scoring & Grading System

Sanfoundry tests and quizzes are designed to provide a real-time online exam experience. Here is what you need to know about them.

  • Scoring System: You get 2 points for each correct answer but lose 1 point for every wrong answer.
  • Grading System: Your grade depends on your final score and can be one of the following:

    • Grade A* - Genius (100%)
    • Grade A - Excellent (80% to 99%)
    • Grade B - Good (60% to 80%)
    • Grade C - Average (40% to 60%)
    • Grade D - Poor (0% to 40%)
advertisement
advertisement
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & discussions at Telegram SanfoundryClasses.