Engineering Mechanics Mock Test 5

10%

Question 1 of 10

1. Cable takes a shape of a ____________ when is subjected to loadings.

Spring

Line

Complex figure

Helix

Question 1 of 10

Question 2 of 10

2. Being inextensible the cable has ___________ length.

Constant

Infinite

Average to zero

Zero

Question 2 of 10

Question 3 of 10

3. The internal loading can be found by _________________

Method of sections

Method of area

Method of volume

Method of line

Question 3 of 10

Question 4 of 10

4. The internal loading can be found by ________________________

Distributed load method

Method of volume

Method of area

Method of line

Question 4 of 10

Question 5 of 10

5. To design the space trusses which of the following rules is followed?

The loads are not applied at all to the joints

All the loads are applied by the use of cables

All the loads are not applied at the joints

The loads are applied at the joints

Question 5 of 10

Question 6 of 10

6. The determination of the internal loading in the beams is usually done so as to ______________

Know the length

Design the beam

Break the beam

Know the diameter

Question 6 of 10

Question 7 of 10

7. The design of the beam requires the knowledge of the variation of the ____________

Rolling forces

Rotational forces

Bending moment

External forces

Question 7 of 10

Question 8 of 10

8. In a roof supporting space truss, the load is transmitted as:

First to the truss then the joints through purlins

First to the truss then the purlins through joints

First to the joints then the trusses through purlins

First to the purlins then the joints through trusses

Question 8 of 10

Question 9 of 10

9. The force acting perpendicular to the beam is called _______________ force.

Perpendicular

Distortion

Orthogonal

Normal