My Report (&Account)

Instrumentation Transducers Online Test


Correct Answer: 2 points | Wrong: -1 point
Grades: A* (100% score) | A (80%-99%) | B (60%-80%) | C (40%-60%) | D (0%-40%)
advertisement

Here is the complete list of test quizzes on Instrumentation Transducers.

1. What will happen for resistivity metal and semiconductor if the temperature is increased?

Question 1 of 50

2. Band width of CRT will be _____________

Question 2 of 50

3. Inverse transducers are also known as _________________

Question 3 of 50

4. BAW stands for __________________

Question 4 of 50

5. In line code transmission, signal is represented by ______________

Question 5 of 50

6. _________________ can be used as a replacement for thermocouple lead.

Question 6 of 50

7. Which of the following op-amp configurations are not possible?

Question 7 of 50

8. Density of flowing liquid can be measured using____________

Question 8 of 50

9. PMMC system is used for providing ______________

Question 9 of 50

10. Which of the following quantities are insensitive to solid state semiconductor photoelectric transducers?

Question 10 of 50

11. Piezo electric materials are well cut for _____________

Question 11 of 50

12. What is the Common Mode Rejection Ratio?

Question 12 of 50

13. Torque of PMMC device is proportional to _______________

Question 13 of 50

14. Which of the following devices can be used for measuring torque?

Question 14 of 50

15. ANN stands for ___________

Question 15 of 50

16. Which of the following represents negative magnetostriction?

Question 16 of 50

17. Driver has high output level when____________

Question 17 of 50

18. LED and laser emit radiation in ___________

Question 18 of 50

19. Which of the following cannot be measured using ionization transducer?

Question 19 of 50

20. All waves in electromagnetic spectrum has the same speed in vacuum.

Question 20 of 50

21. Which of the following cannot be used for density measurement?

Question 21 of 50

22. Which of the following represents for torque speed characteristic for dc motor?

Question 22 of 50

23. Which of the following represents correct relationship for strain in ring-type load cell?

Question 23 of 50

24. What is the Laplace transform of the component inductor?

Question 24 of 50

25. Gate is equivalent to ________________

Question 25 of 50

26. PICT stands for ______________________

Question 26 of 50

27. Which of the following is not a scalar quantity?

Question 27 of 50

28. Electromagnetic flow meter is based on ________________

Question 28 of 50

29. Accuracy and Precision are dependent on each other.

Question 29 of 50

30. Which of the following represents the correct relationship between frequency and angular frequency?

Question 30 of 50

31. Input impedance of oscilloscope is _______________

Question 31 of 50

32. Absolute encoders require data.

Question 32 of 50

33. How bandwidth can be increased?

Question 33 of 50

34. Silica glass of hydroxyl concentration can be used for ___________ of wavelength.

Question 34 of 50

35. Telemetry allow data flow in ____________

Question 35 of 50

36. Which of the following is more used core in spectrometer?

Question 36 of 50

37. During a measurement, for a measure value "B”, absolute error is obtained as "A", what will be the relative error of measurement?

Question 37 of 50

38. Which of the following filter is used where the phase is of higher priority?

Question 38 of 50

39. VCO is used for _________________

Question 39 of 50

40. Which of the following can be measured using Piezo-electric transducer?

Question 40 of 50

41. In a measuring system what is the term used to specify a difference between higher and lower calibration values?

Question 41 of 50

42. FM generators for communication has frequency ______________

Question 42 of 50

43. Which of the following represents the correct relationship of density and length of column?

Question 43 of 50

44. Which of the following circuit limit amplitude in FM signal?

Question 44 of 50

45. Foster-seely detector is ___________

Question 45 of 50

46. DTMF stands for ________________

Question 46 of 50

47. Which of the following represents pH of acidic medium?

Question 47 of 50

48. Sensitivity can represent in terms of the lumen.

Question 48 of 50

49. Which of the following is correct for SBOD?

Question 49 of 50

50. Polypropylene is a/an _____________

Question 50 of 50


 

Topic wise Test Quizzes on Instrumentation Transducers

Instrumentation Transducers tests, quizzes, and exams are great ways to learn and test your Instrumentation Transducers skills. Whether you’re a beginner or experienced, challenge and boost your confidence with our engaging online quizzes on Instrumentation Transducers Basics, Electrical Measuring System, Mechanical Transducers, Feedback Transducer System, Telemetry, Sensor Technology, Sophisticated Instrument and Advanced Instrumentation. Start the Instrumentation Transducers online test now!

Instrumentation Transducers Basic Quiz

Electrical Measuring System Quiz

Instrument System Dynamics Quiz

Mechanical Transducers Quiz

Passive Transducers Quiz

Active Transducers Quiz

Feedback Transducer System Quiz

Signal Processing Circuit Quiz

Analog and Digital Circuit Quiz

Telemetry Quiz

Sensor Technology Quiz

Sophisticated Instrument Quiz

Advanced Instrumentation Quiz

Instrumentation Transducers Certification Test

Instrumentation Transducers Certification Test is a free certification exam. However, you need to score at least a B grade in the “Qualifier Test” to be eligible to take part in this test. So, take the “Qualifier Test” before the Certification test.

Qualifier Test Certification Test

Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Instrumentation Transducers Internship Test

If you scored either Grade A* or Grade A in our Instrumentation Transducers Internship Test, then you can apply for Internship at Sanfoundry in Instrumentation Transducers.

Instrumentation Transducers Internship Test

Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Instrumentation Transducers Job Test

It’s designed to test and improve your skills for a successful career, as well as to apply for jobs.

Instrumentation Transducers Job Test

Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

  
Note: Before you get started on these series of online tests, you should practice our collection of 1000 MCQs on Instrumentation Transducers here.

Sanfoundry Scoring & Grading System

Sanfoundry tests and quizzes are designed to provide a real-time online exam experience. Here’s what you need to know about them.

  • Scoring System: You get 2 points for each correct answer but lose 1 point for every wrong answer.
  • Grading System: Your grade depends on your final score and can be one of the following:

    • Grade A* – Genius (100%)
    • Grade A – Excellent (80% to 99%)
    • Grade B – Good (60% to 80%)
    • Grade C – Average (40% to 60%)
    • Grade D – Poor (0% to 40%)
advertisement
advertisement
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & discussions at Telegram SanfoundryClasses.