My Report (&Account)

Concrete Technology Online Test


Correct Answer: 2 points | Wrong: -1 point
Grades: A* (100% score) | A (80%-99%) | B (60%-80%) | C (40%-60%) | D (0%-40%)
advertisement

Here is the complete list of test quizzes on Concrete Technology.

1. SCC is measured using the _________

Question 1 of 50

2. Pick up the most appropriate statement from the following.

Question 2 of 50

3. What is the permissible limits for construction of chlorides in water for PCC work?

Question 3 of 50

4. Diameter of Round Steel Fiber lies in the range of ________ mm.

Question 4 of 50

5. Classification of admixtures are classified into ________ types.

Question 5 of 50

6. Which type of aggregate is shown below?
Flaky aggregate is a type of aggregate with thickness is small relative to the width

Question 6 of 50

7. The w/c ratio is kept in the range of _______

Question 7 of 50

8. The interference field near the face of a transducer is often referred to as the ______________

Question 8 of 50

9. Which of the following are the advantages of this concrete?

Question 9 of 50

10. In Concrete core test the strength is ________ at the top and _________ at the bottom.

Question 10 of 50

11. When concrete is to be laid under water ___________ is to used.

Question 11 of 50

12. At least 30 __________ of crosshead travel or more for high elongation materials.

Question 12 of 50

13. Creep is _________ to the strength of concrete.

Question 13 of 50

14. Bulk density of the silica fume varies from ____________

Question 14 of 50

15. Find the odd one out.

Question 15 of 50

16. Which cement is used for the construction of water-retaining structure like tanks, reservoirs, retaining walls, swimming pools, dams, bridges, piers etc?

Question 16 of 50

17. How to improve the workability of concrete.

Question 17 of 50

18. What does x3 in power’s experiment stands for?

Question 18 of 50

19. Strength of concrete is ___________

Question 19 of 50

20. Workability of concrete is inversely proportional to __________

Question 20 of 50

21. The compressive strength varies from ____________

Question 21 of 50

22. Creep is ____________

Question 22 of 50

23. _______ cement content to avoid shrinkage cracking due to temperature cycle in mass concrete.

Question 23 of 50

24. It __________ the quantity and ___________ cost of sampling and testing.

Question 24 of 50

25. What is the approx. mix proportion for M25?

Question 25 of 50

26. What is the maximum limit (ppm) for chlorides in water?

Question 26 of 50

27. The adequate workability necessary for ___________ compaction with the compacting equipment available.

Question 27 of 50

28. IS 1199:1959 is for ____________

Question 28 of 50

29. Which test is used to determine the dimensions of any object?

Question 29 of 50

30. IS 1489(Part 1):1991 is for ____________

Question 30 of 50

31. ____ cement is used for formwork that can be removed earlier and reused in other areas which save the cost of formwork.

Question 31 of 50

32. A maximum value of _________ percent is allowed for WBM base course in Indian conditions.

Question 32 of 50

33. What is void ratio?

Question 33 of 50

34. The process of removing the irregularities from the surface of concrete left after screeding is called floating.

Question 34 of 50

35. This strain increases over time due to _________

Question 35 of 50

36. It __________ job-site concrete handling, and testing procedures to __________ potential liability to the company.

Question 36 of 50

37. In the wet process of cement manufacturing raw material is heated to about _____________

Question 37 of 50

38. What is flexural strength?

Question 38 of 50

39. ____________ mm nominal maximum size aggregates gives optimum strength.

Question 39 of 50

40. What is the amount of mixing water used to make LWC?

Question 40 of 50

41. What is the standard value of expansion for super sulphated cement?

Question 41 of 50

42. A maximum value of ___ percent is allowed for WBM base course in Indian conditions.

Question 42 of 50

43. Gel/Space ratio = x = Volume of gel / Space available = 0.657 C / 0.319 C+ Wo. Here Wo stands for?

Question 43 of 50

44. Which chemical compostion has highest content in OPC?

Question 44 of 50

45. Range of modulus of elasticity for UHPC ___________

Question 45 of 50

46. According to geological origin, aggregates is/are classified into __________ types.

Question 46 of 50

47. It is observed that 66-85% of the 20 years shrinkage occurs in _____

Question 47 of 50

48. IS 457:1957 is for _____

Question 48 of 50

49. Find the odd one out.

Question 49 of 50

50. According to IRC:15-2011, maximum free W/C ratio for PPC is _________

Question 50 of 50


 

Topic wise Test Quizzes on Concrete Technology

Concrete Technology tests, quizzes, and exams are great ways to learn and test your Concrete Technology skills. Whether you’re a beginner or experienced, challenge and boost your confidence with our engaging online quizzes on Concrete Technology Basics, Cement, Aggregates, Admixture, Fresh Concrete, Concrete Strength, Elasticity and Creep, Shrinkage, Concrete Durability and Testing, Concrete Mix Design, Concrete Quality and Structures. Start the Concrete Technology online test now!

Concrete Technology Basic Quiz

Cement Quiz

Aggregates Quiz

Admixture Quiz

Construction Chemical Quiz

Fresh Concrete Quiz

Concrete Strength Quiz

Elasticity and Creep Quiz

Shrinkage Quiz

Concrete Durability Quiz

Concrete Testing Quiz

Concrete Mix Design Quiz

Concrete Quality Quiz

Concrete Method Quiz

Concrete Structure Quiz


Concrete Technology Certification Test

Concrete Technology Certification Test is a free certification exam. However, you need to score an A grade in each of the "Certification Level Tests 1 to 10" to be eligible to take part in this certification test. So, take all the "10 Tests" starting from Certification Level 1 upto Level 10, before taking the final Certification test.

Level 1 Test Certification Test

Level 1 to 10 Tests:
Total Questions: 25, Total Time: 30 min, Correct Answer: 2 points, Wrong Answer: -1 point

Certification Test:
Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Concrete Technology Internship Test

If you scored either Grade A* or Grade A in our Concrete Technology Internship Test, then you can apply for Internship at Sanfoundry in Concrete Technology.

Concrete Technology Internship Test

Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Concrete Technology Job Test

It is designed to test and improve your skills for a successful career, as well as to apply for jobs.

Concrete Technology Job Test

Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Note: Before you get started on these series of online tests, you should practice our collection of 1000 MCQs on Concrete Technology .

Sanfoundry Scoring & Grading System

Sanfoundry tests and quizzes are designed to provide a real-time online exam experience. Here is what you need to know about them.

  • Scoring System: You get 2 points for each correct answer but lose 1 point for every wrong answer.
  • Grading System: Your grade depends on your final score and can be one of the following:

    • Grade A* - Genius (100%)
    • Grade A - Excellent (80% to 99%)
    • Grade B - Good (60% to 80%)
    • Grade C - Average (40% to 60%)
    • Grade D - Poor (0% to 40%)
advertisement
advertisement
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & discussions at Telegram SanfoundryClasses.