My Report (&Account)

Applied Chemistry Online Test


Correct Answer: 2 points | Wrong: -1 point
Grades: A* (100% score) | A (80%-99%) | B (60%-80%) | C (40%-60%) | D (0%-40%)

Here is the complete list of test quizzes on Applied Chemistry.

1. The process of coating iron or steel sheet with a thin coat of zinc to prevent iron from rusting is called ____________

Question 1 of 50

2. Lime soda process removes _________ from the water.

Question 2 of 50

3. In steel and steel lubrication, the zinc dialkyl dithiosulphates forms __________

Question 3 of 50

4. which of the following does not include in the monitoring of river pollution?

Question 4 of 50

5. To produce the smoked rubber, the rubber sheets are hanged in smoked chambers at __________

Question 5 of 50

6. The acid content ______ with time.

Question 6 of 50

7. Domestic water treatment is carried out under __________ conditions.

Question 7 of 50

8. Well water in wells located in the areas of oil and gases will contain __________

Question 8 of 50

9. If the traces of water is left in the vegetable oil then ________ is formed.

Question 9 of 50

10. Lubricants are used to prevent the moulded article from _________

Question 10 of 50

11. Conductivity comes under the ___________ monitoring of the lake.

Question 11 of 50

12. Darkening of the oil colour takes place due to ________

Question 12 of 50

13. It reduces the use of _________

Question 13 of 50

14. In Daniel cell, the two electrodes are separated by salt bridge.

Question 14 of 50

15. Depending on the embodiment ____________ technique generate power from hydro electric turbine.

Question 15 of 50

16. CNT posses strength up to ________

Question 16 of 50

17. __________ imparts peculiar odour to the water.

Question 17 of 50

18. CNT exhibits a property called ballistic condition.

Question 18 of 50

19. The end point of the titration in the soap titration method is ___________

Question 19 of 50

20. The oceanic tides are due to __________

Question 20 of 50

21. Aromatic compounds are _____ with water.

Question 21 of 50

22. After drying process the liquid phase is removed from the gel and ___________ is performed.

Question 22 of 50

23. The cost of production for the injection moulding is ___________

Question 23 of 50

24. BUNA- S is a __________

Question 24 of 50

25. Which of the following is not the inorganic lubricant?

Question 25 of 50

26. Which of the following has no acid value?

Question 26 of 50

27. Batch process is only used for removing the hardness of the water on _________

Question 27 of 50

28. In biological oxidation process, depending on the organic load, the oxidation takes place ___________

Question 28 of 50

29. Modification of the dulong's formula can be done by considering the ___________

Question 29 of 50

30. ___________ water contains more soluble salts than the surface water.

Question 30 of 50

31. __________ are used for higher flow of water.

Question 31 of 50

32. The lubricants used in refrigerators will have ________

Question 32 of 50

33. Graphite has layered _________ structure.

Question 33 of 50

34. Which of the following is not lost during corrosion?

Question 34 of 50

35. The lowest temperature at which the oils gives enough vapour.

Question 35 of 50

36. Micro fluid reactor will minimise _________

Question 36 of 50

37. Wind generator is used for ________

Question 37 of 50

38. When the coal is completely burnt in air, then the maximum temperature reached is called _________

Question 38 of 50

39. In methyl alcohol-oxygen alkaline fuel cell ___________ is used as the fuel.

Question 39 of 50

40. Dye-sensitized solar cells are made from ________ organic dye.

Question 40 of 50

41. Mechanism of polymerisation is classified into _______ types.

Question 41 of 50

42. C=70%, O=10%, N=1%, S=5% and ash=4%.The NCV of the fuel was found to be 9210cal/g. percentage of hydrogen be x and HCV of the fuel be y. Find out y/x.

Question 42 of 50

43. Which of the following process is correct in the process of conversion of wood into coal?

Question 43 of 50

44. The concentration of the micelle is measured as __________

Question 44 of 50

45. Powder of a solid lubricant delivered to the __________

Question 45 of 50

46. The __________ is used to turn the power into AC.

Question 46 of 50

47. Which of the following is a stabilizer?

Question 47 of 50

48. In determination of saponification value of the oil reaction _______ is unreacted.

Question 48 of 50

49. The friction is needed to be reduced because _________

Question 49 of 50

50. Metal nano particles particularly _____________ nano particles are prepared by the chemical reduction method.

Question 50 of 50


 

Topic wise Test Quizzes on Applied Chemistry

Applied Chemistry tests, quizzes, and exams are great ways to learn and test your Applied Chemistry skills. Whether you’re a beginner or experienced, challenge and boost your confidence with our engaging online quizzes on Applied Chemistry Basics, Fuel Technology, Lubricants and its classification, Green Chemistry, Nano Materials, Polymers, Plastics, Water Pollution, Electro Chemical Cell and Corrosion. Start the Applied Chemistry online test now!

Applied Chemistry Basic Quiz

Fuel Technology Quiz

Lubricants Classification Quiz

Lubricants Quiz

Green Chemistry Quiz

Nano Materials Quiz

Biomass and Biofuel Quiz

Polymers Quiz

Plastics Quiz

Water Sources and Hardness Quiz

Water Pollution Quiz

Electro Chemical Cell Quiz

Corrosion Quiz


Applied Chemistry Certification Test

Applied Chemistry Certification Test is a free certification exam. However, you need to score an A grade in each of the "Certification Level Tests 1 to 10" to be eligible to take part in this certification test. So, take all the "10 Tests" starting from Certification Level 1 upto Level 10, before taking the final Certification test.

Level 1 Test Certification Test

Level 1 to 10 Tests:
Total Questions: 25, Total Time: 30 min, Correct Answer: 2 points, Wrong Answer: -1 point

Certification Test:
Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Applied Chemistry Internship Test

If you scored either Grade A* or Grade A in our Applied Chemistry Internship Test, then you can apply for Internship at Sanfoundry in Applied Chemistry.

Applied Chemistry Internship Test

Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Applied Chemistry Job Test

It is designed to test and improve your skills for a successful career, as well as to apply for jobs.

Applied Chemistry Job Test

Total Questions: 50, Total Time: 1 hour, Correct Answer: 2 points, Wrong Answer: -1 point

Note: Before you get started on these series of online tests, you should practice our collection of 1000 MCQs on Applied Chemistry .

Sanfoundry Scoring & Grading System

Sanfoundry tests and quizzes are designed to provide a real-time online exam experience. Here is what you need to know about them.

  • Scoring System: You get 2 points for each correct answer but lose 1 point for every wrong answer.
  • Grading System: Your grade depends on your final score and can be one of the following:

    • Grade A* - Genius (100%)
    • Grade A - Excellent (80% to 99%)
    • Grade B - Good (60% to 80%)
    • Grade C - Average (40% to 60%)
    • Grade D - Poor (0% to 40%)
advertisement
advertisement
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & discussions at Telegram SanfoundryClasses.